[Logwatch-Devel] RAID errors

Paweł Gołaszewski blues at ds.pg.gda.pl
Mon Aug 23 23:59:51 MST 2004


On Thu, 5 Aug 2004, Kirk Bauer wrote:
> I actually had thought about writing a filter to parse /proc/mdstat and
> report any errors.  But I have limited data to work with... here is what
> mine says:
> 
> # cat /proc/mdstat
> Personalities : [raid5]
> read_ahead 1024 sectors
> md0 : active raid5 sdd1[2] sde1[1] sdc1[0]
>       97691008 blocks level 5, 32k chunk, algorithm 2 [3/3] [UUU]
> 
> unused devices: <none>

Well, this is entry from kernel 2.2.26 with removed one disk and now it's 
recovering:

Personalities : [raid1] 
read_ahead 1024 sectors
md4 : active raid1 sdb8[2] sda8[0] 12779584 blocks [2/1] [U_]
md3 : active raid1 sdb7[2] sda7[0] 10241280 blocks [2/1] [U_]
md2 : active raid1 sdb6[2] sda6[0] 3582336 blocks [2/1] [U_]
md1 : active raid1 sdb5[2] sda5[0] 5116544 blocks [2/1] [U_]
md0 : active raid1 sdb2[2] sda2[0] 3582400 blocks [2/1] [U_] recovery=53% finish=1.1min
unused devices: <none>


-- 
pozdr.  Pawe³ Go³aszewski 
---------------------------------
If you think of MS-DOS as mono, and Windows as stereo,
then Linux is Dolby Pro-Logic Surround Sound with Bass Boost
and all the music is free.


More information about the Logwatch-Devel mailing list