[Logwatch] cron problem
Scott Martin
martins@ohio.edu
Tue, 28 May 2002 11:31:33 -0400
This is a multi-part message in MIME format.
------=_NextPart_000_004B_01C2063B.38219FC0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Kirk,
Unfortunately I am still not getting any output from the cron section. I
have attached the output of the "logwatch --print --debug 10 >
logwatch.out 2>&1" command and my cron log as of today. Could you also
tell me what changes I need to make to get it to process the
ftpd-messages section (see below) correctly? It looks like the output of
wu-ftpd changed with Redhat 7.3.
-----Original Message-----
From: Kirk Bauer [mailto:kirk@kaybee.org]
Sent: Thursday, May 23, 2002 12:26 AM
To: Scott Martin
Cc: Logwatch@logwatch.org
Subject: Re: [Logwatch] cron problem
On Wed, 22 May 2002, Scott Martin wrote:
> I am setting up logwatch (version checked out from CVS today) to work
> with Redhat 7.3. The default configuration does not work with the cron
> log. I have traced the problem down to the
> /etc/log.d/scripts/logfiles/cron/applydate script. If I comment out
some
> of the lines of the script like so and output the entire log file, I
get
> output:
I forgot to chomp the carriage return off of the SearchDate2 :(
It will be fixed in 3.1 which should be coming out soon.
--
Kirk Bauer -- CmpE, Georgia Tech -- kirk@kaybee.org -- Avid Linux User
http://linux.kaybee.org | www.autorpm.org | www.logwatch.org
Opinions expressed are my own, but they should be everybody's.
------=_NextPart_000_004B_01C2063B.38219FC0
Content-Type: application/octet-stream;
name="cron"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="cron"
May 19 04:22:00 woub CROND[27058]: (root) CMD (run-parts =
/etc/cron.weekly) =0A=
May 19 04:22:00 woub anacron[27062]: Updated timestamp for job =
`cron.weekly' to 2002-05-19=0A=
May 19 05:01:00 woub CROND[29536]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 06:01:00 woub CROND[29543]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 07:01:00 woub CROND[29549]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 08:01:00 woub CROND[29555]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 09:01:00 woub CROND[29566]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 10:01:00 woub CROND[29647]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 11:01:00 woub CROND[29726]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 12:01:00 woub CROND[29819]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 13:01:00 woub CROND[30008]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 14:01:00 woub CROND[30019]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 15:01:00 woub CROND[30030]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 16:01:00 woub CROND[30040]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 17:01:00 woub CROND[30043]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 18:00:00 woub CROND[30046]: (root) CMD (cp =
/server/webtemp/radio-index3.html /server/woub/radio/index.html) =0A=
May 19 18:01:00 woub CROND[30049]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 19:01:00 woub CROND[30072]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 20:01:00 woub CROND[30081]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 21:01:00 woub CROND[30091]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 22:01:00 woub CROND[30101]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 19 23:01:00 woub CROND[30117]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 00:01:00 woub CROND[30121]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 01:00:00 woub CROND[30128]: (root) CMD (cp =
/server/webtemp/statenews-index2.html /server/Web/opr/index.html) =0A=
May 20 01:01:00 woub CROND[30131]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 02:01:00 woub CROND[30134]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 03:01:00 woub CROND[30137]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 04:01:00 woub CROND[30151]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 04:02:00 woub CROND[30153]: (root) CMD (run-parts =
/etc/cron.daily) =0A=
May 20 04:10:08 woub anacron[30486]: Updated timestamp for job =
`cron.daily' to 2002-05-20=0A=
May 20 05:01:00 woub CROND[30630]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 06:01:00 woub CROND[30635]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 07:01:00 woub CROND[30641]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 08:01:00 woub CROND[30668]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 09:01:00 woub CROND[30676]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 10:01:00 woub CROND[30694]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 11:01:00 woub CROND[30723]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 12:01:00 woub CROND[30903]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 13:01:00 woub CROND[31004]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 14:01:00 woub CROND[31053]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 15:01:00 woub CROND[31205]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 16:01:00 woub CROND[31536]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 16:09:28 woub crontab[31606]: (root) BEGIN EDIT (root) =0A=
May 20 16:10:10 woub crontab[31606]: (root) REPLACE (root) =0A=
May 20 16:10:10 woub crontab[31606]: (root) END EDIT (root) =0A=
May 20 16:11:00 woub crond[844]: (root) RELOAD (cron/root) =0A=
May 20 17:01:00 woub CROND[31976]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 18:01:00 woub CROND[32180]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 18:20:00 woub CROND[32234]: (root) CMD (cp =
/server/woub/tmp/newswatch-live.ram /server/woub/tv/newswatch.ram) =0A=
May 20 19:01:00 woub CROND[32305]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 19:10:00 woub CROND[32308]: (root) CMD (cp =
/server/woub/tmp/newswatch-archive.ram /server/woub/tv/newswatch.ram) =0A=
May 20 20:01:00 woub CROND[32505]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 21:01:00 woub CROND[32663]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 20 22:01:00 woub CROND[421]: (root) CMD (run-parts /etc/cron.hourly) =0A=
May 20 23:01:00 woub CROND[553]: (root) CMD (run-parts /etc/cron.hourly) =0A=
May 21 00:01:00 woub CROND[780]: (root) CMD (run-parts /etc/cron.hourly) =0A=
May 21 01:00:00 woub CROND[985]: (root) CMD (cp =
/server/webtemp/radio-index2.html /server/woub/radio/index.html) =0A=
May 21 01:01:00 woub CROND[990]: (root) CMD (run-parts /etc/cron.hourly) =0A=
May 21 02:01:00 woub CROND[1311]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 03:01:00 woub CROND[1335]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 04:01:00 woub CROND[1351]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 04:02:00 woub CROND[1353]: (root) CMD (run-parts /etc/cron.daily) =0A=
May 21 04:14:50 woub anacron[1695]: Updated timestamp for job =
`cron.daily' to 2002-05-21=0A=
May 21 05:01:00 woub CROND[1834]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 06:01:00 woub CROND[1843]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 07:01:00 woub CROND[1911]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 08:01:00 woub CROND[1916]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 09:01:00 woub CROND[1932]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 09:09:13 woub crontab[1981]: (root) BEGIN EDIT (root) =0A=
May 21 09:09:32 woub crontab[1981]: (root) REPLACE (root) =0A=
May 21 09:09:32 woub crontab[1981]: (root) END EDIT (root) =0A=
May 21 09:10:00 woub crond[844]: (root) RELOAD (cron/root) =0A=
May 21 10:01:00 woub CROND[2208]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 11:01:00 woub CROND[2275]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 12:01:00 woub CROND[2391]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 12:36:42 woub crontab[2470]: (root) BEGIN EDIT (root) =0A=
May 21 12:37:21 woub crontab[2470]: (root) REPLACE (root) =0A=
May 21 12:37:21 woub crontab[2470]: (root) END EDIT (root) =0A=
May 21 12:38:00 woub crond[844]: (root) RELOAD (cron/root) =0A=
May 21 13:01:00 woub CROND[2475]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 14:01:00 woub CROND[2923]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 15:01:00 woub CROND[3843]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 16:01:00 woub CROND[8515]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 17:00:00 woub CROND[8735]: (root) CMD (cp =
/server/webtemp/radio-index2.html /server/woub/radio/index.html) =0A=
May 21 17:01:00 woub CROND[8738]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 18:01:00 woub CROND[8749]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 18:20:00 woub CROND[8752]: (root) CMD (cp =
/server/woub/tmp/newswatch-live.ram /server/woub/tv/newswatch.ram) =0A=
May 21 19:01:00 woub CROND[8759]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 19:10:00 woub CROND[8761]: (root) CMD (cp =
/server/woub/tmp/newswatch-archive.ram /server/woub/tv/newswatch.ram) =0A=
May 21 20:01:00 woub CROND[8767]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 21:01:00 woub CROND[8803]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 22:01:00 woub CROND[9095]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 21 23:01:00 woub CROND[9335]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 00:01:00 woub CROND[9379]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 01:00:00 woub CROND[9459]: (root) CMD (cp =
/server/webtemp/tv-index2.html /server/woub/tv/index.html) =0A=
May 22 01:01:00 woub CROND[9466]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 02:01:00 woub CROND[9483]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 03:01:00 woub CROND[9492]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 04:01:00 woub CROND[9499]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 04:02:00 woub CROND[9501]: (root) CMD (run-parts /etc/cron.daily) =0A=
May 22 04:16:33 woub anacron[9849]: Updated timestamp for job =
`cron.daily' to 2002-05-22=0A=
May 22 05:01:00 woub CROND[10039]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 06:01:00 woub CROND[10133]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 07:01:00 woub CROND[10136]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 08:01:00 woub CROND[10142]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 09:01:00 woub CROND[10210]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 10:01:00 woub CROND[10438]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 11:01:00 woub CROND[10513]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 12:01:00 woub CROND[10550]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 13:01:00 woub CROND[11548]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 13:04:45 woub crontab[11615]: (root) BEGIN EDIT (root) =0A=
May 22 13:06:21 woub crontab[11615]: (root) REPLACE (root) =0A=
May 22 13:06:21 woub crontab[11615]: (root) END EDIT (root) =0A=
May 22 13:06:51 woub crontab[11865]: (root) BEGIN EDIT (root) =0A=
May 22 13:07:00 woub crond[844]: (root) RELOAD (cron/root) =0A=
May 22 13:07:01 woub crontab[11865]: (root) REPLACE (root) =0A=
May 22 13:07:01 woub crontab[11865]: (root) END EDIT (root) =0A=
May 22 13:08:00 woub crond[844]: (root) RELOAD (cron/root) =0A=
May 22 14:01:00 woub CROND[11987]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 15:01:00 woub CROND[12277]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 16:01:00 woub CROND[12397]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 17:01:00 woub CROND[12460]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 18:01:00 woub CROND[12515]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 18:20:00 woub CROND[12530]: (root) CMD (cp =
/server/woub/tmp/newswatch-live.ram /server/woub/tv/newswatch.ram) =0A=
May 22 19:00:00 woub CROND[12547]: (root) CMD (cp =
/server/webtemp/radio-index2.html /server/woub/radio/index.html) =0A=
May 22 19:01:00 woub CROND[12550]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 19:10:00 woub CROND[12553]: (root) CMD (cp =
/server/woub/tmp/newswatch-archive.ram /server/woub/tv/newswatch.ram) =0A=
May 22 20:01:00 woub CROND[12575]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 21:01:00 woub CROND[12770]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 22:01:00 woub CROND[12852]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 22 23:01:00 woub CROND[12867]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 00:01:00 woub CROND[12881]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 01:01:00 woub CROND[13052]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 02:01:00 woub CROND[13134]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 03:01:00 woub CROND[13147]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 04:01:00 woub CROND[13174]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 04:02:00 woub CROND[13176]: (root) CMD (run-parts =
/etc/cron.daily) =0A=
May 23 04:17:26 woub anacron[13542]: Updated timestamp for job =
`cron.daily' to 2002-05-23=0A=
May 23 05:01:00 woub CROND[13680]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 06:01:00 woub CROND[13857]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 07:01:00 woub CROND[13919]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 08:01:00 woub CROND[13978]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 09:01:00 woub CROND[14211]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 10:01:00 woub CROND[14276]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 11:01:00 woub CROND[14296]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 12:01:00 woub CROND[14322]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 13:01:00 woub CROND[14444]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
May 23 14:01:00 woub CROND[15184]: (root) CMD (run-parts =
/etc/cron.hourly) =0A=
------=_NextPart_000_004B_01C2063B.38219FC0
Content-Type: application/octet-stream;
name="logwatch.out"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="logwatch.out"
=0A=
Command Line Parameters:=0A=
Log File List:=0A=
=0A=
Service List:=0A=
=0A=
Config After Command Line Parsing:=0A=
range -> yesterday=0A=
logdir -> /var/log=0A=
usemktemp -> 1=0A=
print -> 1=0A=
tmpdir -> /tmp=0A=
archives -> 0=0A=
save -> =0A=
detail -> 0=0A=
mailto -> =0A=
debug -> 10=0A=
Service List:=0A=
[0] =3D all=0A=
=0A=
LogFile List:=0A=
=0A=
=0A=
=0A=
Config After Everything:=0A=
range -> yesterday=0A=
logdir -> /var/log=0A=
usemktemp -> 1=0A=
print -> 1=0A=
tmpdir -> /tmp=0A=
archives -> 0=0A=
save -> =0A=
detail -> 0=0A=
mailto -> =0A=
debug -> 10=0A=
Service List:=0A=
[0] =3D all=0A=
=0A=
LogFile List:=0A=
=0A=
=0A=
ReadConfigFile: Opening /etc/log.d/conf/services/ftpd-messages.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: ftpd-messages.conf,v 1.7 2002/04/05 =
05:06:17 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: *OnlyService =3D ftpd=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dftpd=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Set this to 1 if you want to ignore =
unmatched FTP messages...=0A=
ReadConfigFile: Read Line: $ftpd_ignore_unmatched =3D 0=0A=
ReadConfigFile: Name=3D$ftpd_ignore_unmatched, Value=3D0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/automount.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: automount.conf,v 1.3 2002/04/09 =
14:39:22 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the automount =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D automount=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dautomount=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/cron.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: cron.conf,v 1.3 2002/03/29 15:30:30 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D cron=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dcron=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/dhcpd.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: dhcpd.conf,v 1.1 2002/04/30 21:24:30 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the dhcpd =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D dhcpd=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Ddhcpd=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/exim.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: exim.conf,v 1.1 2002/04/25 20:02:29 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D exim=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dexim=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the mountd =
service...=0A=
ReadConfigFile: Read Line: #*OnlyService =3D =0A=
ReadConfigFile: Read Line: #*RemoveHeaders =3D =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/proftpd-messages.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: proftpd-messages.conf,v 1.4 2002/04/05 =
05:06:17 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # This is for the ProFTPD daemon, if you have =
it on your system=0A=
ReadConfigFile: Read Line: # If you don't it won't hurt anything.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: *OnlyService =3D proftpd=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dproftpd=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Set this to 1 if you want to ignore =
unmatched FTP messages...=0A=
ReadConfigFile: Read Line: $ftpd_ignore_unmatched =3D 0=0A=
ReadConfigFile: Name=3D$ftpd_ignore_unmatched, Value=3D0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/ftpd-xferlog.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: ftpd-xferlog.conf,v 1.5 2002/04/25 =
20:02:29 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D xferlog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dxferlog=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Set this to 0 to just get a summary of =
transfers (no details)=0A=
ReadConfigFile: Read Line: $detail_transfer=3D1=0A=
ReadConfigFile: Name=3D$detail_transfer, Value=3D1=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/identd.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: identd.conf,v 1.6 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to identd...=0A=
ReadConfigFile: Read Line: *OnlyService =3D identd=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Didentd=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/in.qpopper.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: in.qpopper.conf,v 1.2 2002/04/05 =
05:06:17 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D maillog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmaillog=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the =
in.qpopper service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D in.qpopper=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Din.qpopper=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kenneth Porter <shiva@well.com>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to shiva@well.com.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/init.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: init.conf,v 1.5 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the init =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D init=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dinit=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/ipop3d.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: ipop3d.conf,v 1.1 2002/05/23 04:46:03 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D maillog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmaillog=0A=
ReadConfigFile: Read Line: LogFile =3D secure=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsecure=0A=
ReadConfigFile: Read Line: *OnlyService =3D ipop3d=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dipop3d=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Pawel Jarosz <pj@rsi.pl>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/kernel.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: kernel.conf,v 1.6 2002/04/09 14:39:22 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the kernel =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D kernel=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dkernel=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/modprobe.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: modprobe.conf,v 1.6 2002/04/05 =
05:06:17 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the modprobe =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D modprobe=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dmodprobe=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/mountd.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: mountd.conf,v 1.5 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the mountd =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D mountd=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dmountd=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/named.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: named.conf,v 1.6 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Whether or not to lookup the IPs into =
hostnames...=0A=
ReadConfigFile: Read Line: # Setting this to Yes will significantly =
increase runtime=0A=
ReadConfigFile: Read Line: $named_ip_lookup =3D No=0A=
ReadConfigFile: Name=3D$named_ip_lookup, Value=3Dno=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the named =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D named=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dnamed=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/pam.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: pam.conf,v 1.5 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the pam =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D pam=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dpam=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/pam_pwdb.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: pam_pwdb.conf,v 1.6 2002/04/05 =
05:06:17 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the PAM_pwdb =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D pam_pwdb=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dpam_pwdb=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/pam_unix.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: pam_unix.conf,v 1.1 2002/04/30 =
03:38:17 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/pluto.conf=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # This is very simple. The FreeS/WAN watcher =
doesn't do a whole lot. :)=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: LogFile =3D secure=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsecure=0A=
ReadConfigFile: Opening /etc/log.d/conf/services/portsentry.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: portsentry.conf,v 1.1 2002/05/23 =
04:46:03 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the =
portsentry service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D portsentry=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dportsentry=0A=
ReadConfigFile: Read Line: *RemoveHeaders =3D =0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/sendmail.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: sendmail.conf,v 1.2 2002/04/05 =
05:06:17 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D maillog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmaillog=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the sendmail =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D sendmail=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dsendmail=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Now ignored in actual sendmail script =
(which is more efficient)=0A=
ReadConfigFile: Read Line: #*Remove =3D 'did not issue .* during =
connection to MTA'=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kenneth Porter <shiva@well.com>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to shiva@well.com.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/qmail.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: qmail.conf,v 1.1 2002/05/23 04:46:03 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D maillog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmaillog=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the qmail =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D qmail=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dqmail=0A=
ReadConfigFile: Read Line: *RemoveHeaders =3D =0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # This sets whether to display counts of =
emails from each user & to each user.=0A=
ReadConfigFile: Read Line: # Will make rather a large log file if run on =
a primary mail server.=0A=
ReadConfigFile: Read Line: # Set either 0 or 1=0A=
ReadConfigFile: Read Line: $qmail_high_detail =3D 0ReadConfigFile: =
Name=3D$qmail_high_detail, Value=3D0=0A=
ReadConfigFile: Opening /etc/log.d/conf/services/rt314.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
####=0A=
ReadConfigFile: Read Line: # $Id: rt314.conf,v 1.1 2002/04/18 13:56:50 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
####=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: LogFile =3D rt314=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Drt314=0A=
ReadConfigFile: Opening /etc/log.d/conf/services/samba.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: samba.conf,v 1.3 2002/03/29 15:30:30 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D samba=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsamba=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/secure.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: secure.conf,v 1.7 2002/04/14 14:32:37 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D secure=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsecure=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Whether or not to lookup the IPs into =
hostnames...=0A=
ReadConfigFile: Read Line: # Setting this to Yes will significantly =
increase runtime=0A=
ReadConfigFile: Read Line: $secure_ip_lookup =3D No=0A=
ReadConfigFile: Name=3D$secure_ip_lookup, Value=3Dno=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Use this to ignore certain services in the =
secure log.=0A=
ReadConfigFile: Read Line: # You can ignore as many services as you =
would like.=0A=
ReadConfigFile: Read Line: # (we ignore sshd because its entries are =
processed by the sshd script)=0A=
ReadConfigFile: Read Line: $ignore_services =3D sshd Pluto=0A=
ReadConfigFile: Name=3D$ignore_services, Value=3Dsshd pluto=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # For these services, summarize only (i.e. =
don't least each IP, just=0A=
ReadConfigFile: Read Line: # list the number of connections total)=0A=
ReadConfigFile: Read Line: #$summarize_connections =3D ftp=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/syslogd.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: syslogd.conf,v 1.6 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the syslogd =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D syslogd=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dsyslogd=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/sshd.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: sshd.conf,v 1.10 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D secure=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsecure=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the sshd =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D sshd =0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dsshd=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/sshd2.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: sshd2.conf,v 1.3 2002/04/09 14:39:22 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the sshd2 =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D sshd2=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dsshd2=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/sudo.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: sudo.conf,v 1.2 2002/04/30 03:38:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D secure=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsecure=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the sudo =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D sudo =0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dsudo=0A=
ReadConfigFile: Read Line: *RemoveHeaders=0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Erik Ogan <erik@slackers.net>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Opening /etc/log.d/conf/services/tac_acc.conf=0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D tac_acc=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dtac_acc=0A=
ReadConfigFile: Opening /etc/log.d/conf/services/up2date.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: up2date.conf,v 1.1 2002/04/25 20:02:29 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D up2date=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dup2date=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Eric Moret <eric.moret@epita.fr>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to eric.moret@epita.fr.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/vpopmail.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: vpopmail.conf,v 1.1 2002/05/23 =
04:46:03 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D maillog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmaillog=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the qmail =
service...=0A=
ReadConfigFile: Read Line: *OnlyService =3D vpopmail=0A=
ReadConfigFile: Name=3D*onlyservice, Value=3Dvpopmail=0A=
ReadConfigFile: Read Line: *RemoveHeaders =3D =0A=
ReadConfigFile: Name=3D*removeheaders, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/services/zz-fortune.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: zz-fortune.conf,v 1.4 2002/04/30 =
21:24:30 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # This just displays a fortune at the end of =
the report...=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D NONE=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dnone=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/maillog.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: # $Id: maillog.conf,v 1.2 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kenneth Porter <shiva@well.com>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to shiva@well.com.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D maillog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmaillog=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D maillog.*=0A=
ReadConfigFile: Name=3Darchive, Value=3Dmaillog.*=0A=
ReadConfigFile: Read Line: Archive =3D maillog.*.gz=0A=
ReadConfigFile: Name=3Darchive, Value=3Dmaillog.*.gz=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Expand the repeats=0A=
ReadConfigFile: Read Line: *ExpandRepeats=0A=
ReadConfigFile: Name=3D*expandrepeats, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Now, lets remove the services we don't care =
about at all...=0A=
ReadConfigFile: Read Line: # *RemoveService =3D in.qpopper=0A=
ReadConfigFile: Read Line: # *RemoveService =3D sendmail=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Keep only the lines in the proper date =
range...=0A=
ReadConfigFile: Read Line: *ApplyStdDate=0A=
ReadConfigFile: Name=3D*applystddate, Value=3D=0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/cron.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: # $Id: cron.conf,v 1.4 2002/05/23 04:42:51 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D cron=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dcron=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D cron.*=0A=
ReadConfigFile: Name=3Darchive, Value=3Dcron.*=0A=
ReadConfigFile: Read Line: Archive =3D cron.*.gz=0A=
ReadConfigFile: Name=3Darchive, Value=3Dcron.*.gz=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: *RemoveService =3D anacron=0A=
ReadConfigFile: Name=3D*removeservice, Value=3Danacron=0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/exim.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Id: exim.conf,v 1.1 2002/04/25 20:02:29 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # You can put comments anywhere you want to. =
They are effective for the=0A=
ReadConfigFile: Read Line: # rest of the line.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # this is in the format of <name> =3D =
<value>. Whitespace at the beginning=0A=
ReadConfigFile: Read Line: # and end of the lines is removed. =
Whitespace before and after the =3D sign=0A=
ReadConfigFile: Read Line: # is removed. Everything is case =
*insensitive*.=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Yes =3D True =3D On =3D 1=0A=
ReadConfigFile: Read Line: # No =3D False =3D Off =3D 0=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Which logfile group...=0A=
ReadConfigFile: Read Line: LogFile =3D /var/log/exim/exim_mainlog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3D/var/log/exim/exim_mainlog=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Only give lines pertaining to the sendmail =
service...=0A=
ReadConfigFile: Read Line: #*OnlyService =3D exim=0A=
ReadConfigFile: Read Line: #*RemoveHeaders =3D =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: Archive =3D /var/log/exim/exim_mainlog.*=0A=
ReadConfigFile: Name=3Darchive, Value=3D/var/log/exim/exim_mainlog.*=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Keep only the lines in the proper date =
range...=0A=
ReadConfigFile: Read Line: #*ApplyStdDate =3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: # $Log: exim.conf,v $=0A=
ReadConfigFile: Read Line: # Revision 1.1 2002/04/25 20:02:29 kirk=0A=
ReadConfigFile: Read Line: # - Cleaned up named, sshd, secure, and =
proftpd filters=0A=
ReadConfigFile: Read Line: # - Added Exim, up2date, and sudo filters=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Revision 1.1 2000/04/16 06:40:50=0A=
ReadConfigFile: Read Line: # Initial revision=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
#########################################################################=
##=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Dariusz Nierada =
(dnierada@kat.supermedia.pl)=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/messages.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: # $Id: messages.conf,v 1.13 2002/04/25 =
20:02:29 kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D messages=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dmessages=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D messages.*=0A=
ReadConfigFile: Name=3Darchive, Value=3Dmessages.*=0A=
ReadConfigFile: Read Line: Archive =3D messages.*.gz=0A=
ReadConfigFile: Name=3Darchive, Value=3Dmessages.*.gz=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Expand the repeats=0A=
ReadConfigFile: Read Line: *ExpandRepeats=0A=
ReadConfigFile: Name=3D*expandrepeats, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Now, lets remove the services we don't care =
about at all...=0A=
ReadConfigFile: Read Line: *RemoveService =3D talkd=0A=
ReadConfigFile: Name=3D*removeservice, Value=3Dtalkd=0A=
ReadConfigFile: Read Line: *RemoveService =3D telnetd=0A=
ReadConfigFile: Name=3D*removeservice, Value=3Dtelnetd=0A=
ReadConfigFile: Read Line: *RemoveService =3D inetd=0A=
ReadConfigFile: Name=3D*removeservice, Value=3Dinetd=0A=
ReadConfigFile: Read Line: *RemoveService =3D nfsd=0A=
ReadConfigFile: Name=3D*removeservice, Value=3Dnfsd=0A=
ReadConfigFile: Read Line: *RemoveService =3D /sbin/mingetty=0A=
ReadConfigFile: Name=3D*removeservice, Value=3D/sbin/mingetty=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Keep only the lines in the proper date =
range...=0A=
ReadConfigFile: Read Line: *ApplyStdDate=0A=
ReadConfigFile: Name=3D*applystddate, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/rt314.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: # $Id: rt314.conf,v 1.1 2002/04/18 13:56:50 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D netgear.log=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dnetgear.log=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D netgear.log.*=0A=
ReadConfigFile: Name=3Darchive, Value=3Dnetgear.log.*=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Keep only the lines in the proper date =
range...=0A=
ReadConfigFile: Read Line: *ApplyStdDate=0A=
ReadConfigFile: Name=3D*applystddate, Value=3D=0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/samba.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: # $Id: samba.conf,v 1.5 2002/05/01 21:52:05 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D samba-log.*=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsamba-log.*=0A=
ReadConfigFile: Read Line: LogFile =3D samba/*=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsamba/*=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D /dev/null=0A=
ReadConfigFile: Name=3Darchive, Value=3D/dev/null=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/secure.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: # $Id: secure.conf,v 1.4 2002/04/05 05:06:17 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D secure=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dsecure=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D secure.*=0A=
ReadConfigFile: Name=3Darchive, Value=3Dsecure.*=0A=
ReadConfigFile: Read Line: Archive =3D secure.*.gz=0A=
ReadConfigFile: Name=3Darchive, Value=3Dsecure.*.gz=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Keep only the lines in the proper date =
range...=0A=
ReadConfigFile: Read Line: *ApplyStdDate=0A=
ReadConfigFile: Name=3D*applystddate, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/tac_acc.conf=0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D tac_acc.log=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dtac_acc.log=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D tac_acc.log.*=0A=
ReadConfigFile: Name=3Darchive, Value=3Dtac_acc.log.*=0A=
ReadConfigFile: Read Line: Archive =3D tac_acc.log.*.gz=0A=
ReadConfigFile: Name=3Darchive, Value=3Dtac_acc.log.*.gz=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # Keep only the lines in the proper date =
range...=0A=
ReadConfigFile: Read Line: *ApplyStdDate=0A=
ReadConfigFile: Name=3D*applystddate, Value=3D=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/up2date.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: # $Id: up2date.conf,v 1.1 2002/04/25 20:02:29 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Eric Moret <eric.moret@epita.fr>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to eric.moret@epita.fr.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D up2date=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dup2date=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D up2date.*=0A=
ReadConfigFile: Name=3Darchive, Value=3Dup2date.*=0A=
ReadConfigFile: Read Line: Archive =3D up2date.*.gz=0A=
ReadConfigFile: Name=3Darchive, Value=3Dup2date.*.gz=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Opening /etc/log.d/conf/logfiles/xferlog.conf=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: # $Id: xferlog.conf,v 1.8 2002/03/29 15:30:28 =
kirk Exp $=0A=
ReadConfigFile: Read Line: =
#########################################################################=
#=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: # This was written and is maintained by:=0A=
ReadConfigFile: Read Line: # Kirk Bauer <kirk@kaybee.org>=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: # Please send all comments, suggestions, bug =
reports,=0A=
ReadConfigFile: Read Line: # etc, to kirk@kaybee.org.=0A=
ReadConfigFile: Read Line: #=0A=
ReadConfigFile: Read Line: =
########################################################=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # What actual file? Defaults to LogPath if =
not absolute path....=0A=
ReadConfigFile: Read Line: LogFile =3D xferlog=0A=
ReadConfigFile: Name=3Dlogfile, Value=3Dxferlog=0A=
ReadConfigFile: Read Line: =0A=
ReadConfigFile: Read Line: # If the archives are searched, here is one =
or more line=0A=
ReadConfigFile: Read Line: # (optionally containing wildcards) that tell =
where they are...=0A=
ReadConfigFile: Read Line: # Note: if these are gzipped, you need to end =
with a .gz even if=0A=
ReadConfigFile: Read Line: # you use wildcards...=0A=
ReadConfigFile: Read Line: Archive =3D xferlog.*=0A=
ReadConfigFile: Name=3Darchive, Value=3Dxferlog.*=0A=
ReadConfigFile: Read Line: Archive =3D xferlog.*.gz=0A=
ReadConfigFile: Name=3Darchive, Value=3Dxferlog.*.gz=0A=
ReadConfigFile: Read Line: =0A=
=0A=
All Services:=0A=
[0] =3D automount=0A=
[1] =3D cron=0A=
[2] =3D dhcpd=0A=
[3] =3D exim=0A=
[4] =3D ftpd-messages=0A=
[5] =3D ftpd-xferlog=0A=
[6] =3D identd=0A=
[7] =3D in.qpopper=0A=
[8] =3D init=0A=
[9] =3D ipop3d=0A=
[10] =3D kernel=0A=
[11] =3D modprobe=0A=
[12] =3D mountd=0A=
[13] =3D named=0A=
[14] =3D pam=0A=
[15] =3D pam_pwdb=0A=
[16] =3D pam_unix=0A=
[17] =3D pluto=0A=
[18] =3D portsentry=0A=
[19] =3D proftpd-messages=0A=
[20] =3D qmail=0A=
[21] =3D rt314=0A=
[22] =3D samba=0A=
[23] =3D secure=0A=
[24] =3D sendmail=0A=
[25] =3D sshd=0A=
[26] =3D sshd2=0A=
[27] =3D sudo=0A=
[28] =3D syslogd=0A=
[29] =3D tac_acc=0A=
[30] =3D up2date=0A=
[31] =3D vpopmail=0A=
[32] =3D zz-fortune=0A=
=0A=
All Log Files:=0A=
[0] =3D maillog=0A=
[1] =3D cron=0A=
[2] =3D exim=0A=
[3] =3D messages=0A=
[4] =3D rt314=0A=
[5] =3D samba=0A=
[6] =3D secure=0A=
[7] =3D tac_acc=0A=
[8] =3D up2date=0A=
[9] =3D xferlog=0A=
=0A=
All Shared:=0A=
[0] =3D applystddate=0A=
[1] =3D expandrepeats=0A=
[2] =3D onlycontains=0A=
[3] =3D onlyservice=0A=
[4] =3D remove=0A=
[5] =3D removeheaders=0A=
[6] =3D removeservice=0A=
=0A=
=0A=
All Service Data:=0A=
=0A=
Service Name: syslogd=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D syslogd=0A=
Logfile =3D messages=0A=
=0A=
Service Name: automount=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D automount=0A=
Logfile =3D messages=0A=
=0A=
Service Name: rt314=0A=
logfiles =3D rt314=0A=
Logfile =3D rt314=0A=
=0A=
Service Name: sshd=0A=
logfiles =3D secure=0A=
*removeheaders =3D =0A=
*onlyservice =3D sshd=0A=
Logfile =3D secure=0A=
=0A=
Service Name: pluto=0A=
logfiles =3D secure=0A=
Logfile =3D secure=0A=
=0A=
Service Name: identd=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D identd=0A=
Logfile =3D messages=0A=
=0A=
Service Name: sshd2=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D sshd2=0A=
Logfile =3D messages=0A=
=0A=
Service Name: ftpd-xferlog=0A=
logfiles =3D xferlog=0A=
$detail_transfer =3D 1=0A=
Logfile =3D xferlog=0A=
=0A=
Service Name: ipop3d=0A=
logfiles =3D maillog=0A=
logfiles =3D secure=0A=
*removeheaders =3D =0A=
*onlyservice =3D ipop3d=0A=
Logfile =3D maillog=0A=
Logfile =3D secure=0A=
=0A=
Service Name: sudo=0A=
logfiles =3D secure=0A=
*removeheaders =3D =0A=
*onlyservice =3D sudo=0A=
Logfile =3D secure=0A=
=0A=
Service Name: proftpd-messages=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
$ftpd_ignore_unmatched =3D 0=0A=
*onlyservice =3D proftpd=0A=
Logfile =3D messages=0A=
=0A=
Service Name: modprobe=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D modprobe=0A=
Logfile =3D messages=0A=
=0A=
Service Name: in.qpopper=0A=
logfiles =3D maillog=0A=
*removeheaders =3D =0A=
*onlyservice =3D in.qpopper=0A=
Logfile =3D maillog=0A=
=0A=
Service Name: kernel=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D kernel=0A=
Logfile =3D messages=0A=
=0A=
Service Name: mountd=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D mountd=0A=
Logfile =3D messages=0A=
=0A=
Service Name: pam_pwdb=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D pam_pwdb=0A=
Logfile =3D messages=0A=
=0A=
Service Name: vpopmail=0A=
logfiles =3D maillog=0A=
*removeheaders =3D =0A=
*onlyservice =3D vpopmail=0A=
Logfile =3D maillog=0A=
=0A=
Service Name: qmail=0A=
logfiles =3D maillog=0A=
$qmail_high_detail =3D 0=0A=
*removeheaders =3D =0A=
*onlyservice =3D qmail=0A=
Logfile =3D maillog=0A=
=0A=
Service Name: cron=0A=
logfiles =3D cron=0A=
Logfile =3D cron=0A=
=0A=
Service Name: tac_acc=0A=
logfiles =3D tac_acc=0A=
Logfile =3D tac_acc=0A=
=0A=
Service Name: samba=0A=
logfiles =3D samba=0A=
Logfile =3D samba=0A=
=0A=
Service Name: init=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D init=0A=
Logfile =3D messages=0A=
=0A=
Service Name: portsentry=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D portsentry=0A=
Logfile =3D messages=0A=
=0A=
Service Name: up2date=0A=
logfiles =3D up2date=0A=
Logfile =3D up2date=0A=
=0A=
Service Name: zz-fortune=0A=
logfiles =3D none=0A=
Logfile =3D none=0A=
=0A=
Service Name: ftpd-messages=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
$ftpd_ignore_unmatched =3D 0=0A=
*onlyservice =3D ftpd=0A=
Logfile =3D messages=0A=
=0A=
Service Name: exim=0A=
logfiles =3D exim=0A=
Logfile =3D exim=0A=
=0A=
Service Name: pam=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D pam=0A=
Logfile =3D messages=0A=
=0A=
Service Name: named=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
$named_ip_lookup =3D 0=0A=
*onlyservice =3D named=0A=
Logfile =3D messages=0A=
=0A=
Service Name: dhcpd=0A=
logfiles =3D messages=0A=
*removeheaders =3D =0A=
*onlyservice =3D dhcpd=0A=
Logfile =3D messages=0A=
=0A=
Service Name: sendmail=0A=
logfiles =3D maillog=0A=
*removeheaders =3D =0A=
*onlyservice =3D sendmail=0A=
Logfile =3D maillog=0A=
=0A=
Service Name: pam_unix=0A=
logfiles =3D messages=0A=
Logfile =3D messages=0A=
=0A=
Service Name: secure=0A=
logfiles =3D secure=0A=
$secure_ip_lookup =3D 0=0A=
$ignore_services =3D sshd pluto=0A=
Logfile =3D secure=0A=
=0A=
Services that will be processed:=0A=
[0] =3D automount=0A=
[1] =3D cron=0A=
[2] =3D dhcpd=0A=
[3] =3D exim=0A=
[4] =3D ftpd-messages=0A=
[5] =3D ftpd-xferlog=0A=
[6] =3D identd=0A=
[7] =3D in.qpopper=0A=
[8] =3D init=0A=
[9] =3D ipop3d=0A=
[10] =3D kernel=0A=
[11] =3D modprobe=0A=
[12] =3D mountd=0A=
[13] =3D named=0A=
[14] =3D pam=0A=
[15] =3D pam_pwdb=0A=
[16] =3D pam_unix=0A=
[17] =3D pluto=0A=
[18] =3D portsentry=0A=
[19] =3D proftpd-messages=0A=
[20] =3D qmail=0A=
[21] =3D rt314=0A=
[22] =3D samba=0A=
[23] =3D secure=0A=
[24] =3D sendmail=0A=
[25] =3D sshd=0A=
[26] =3D sshd2=0A=
[27] =3D sudo=0A=
[28] =3D syslogd=0A=
[29] =3D tac_acc=0A=
[30] =3D up2date=0A=
[31] =3D vpopmail=0A=
[32] =3D zz-fortune=0A=
=0A=
=0A=
=0A=
=0A=
All LogFile Data:=0A=
=0A=
Logfile Name: up2date=0A=
logfiles =3D up2date=0A=
archives =3D up2date.*=0A=
archives =3D up2date.*.gz=0A=
Logfile =3D up2date=0A=
Archive =3D up2date.*=0A=
Archive =3D up2date.*.gz=0A=
=0A=
Logfile Name: secure=0A=
logfiles =3D secure=0A=
*applystddate =3D =0A=
archives =3D secure.*=0A=
archives =3D secure.*.gz=0A=
Logfile =3D secure=0A=
Archive =3D secure.*=0A=
Archive =3D secure.*.gz=0A=
=0A=
Logfile Name: rt314=0A=
logfiles =3D netgear.log=0A=
*applystddate =3D =0A=
archives =3D netgear.log.*=0A=
Logfile =3D netgear.log=0A=
Archive =3D netgear.log.*=0A=
=0A=
Logfile Name: exim=0A=
logfiles =3D /var/log/exim/exim_mainlog=0A=
archives =3D /var/log/exim/exim_mainlog.*=0A=
Logfile =3D /var/log/exim/exim_mainlog=0A=
Archive =3D /var/log/exim/exim_mainlog.*=0A=
=0A=
Logfile Name: cron=0A=
logfiles =3D cron=0A=
*removeservice =3D anacron=0A=
archives =3D cron.*=0A=
archives =3D cron.*.gz=0A=
Logfile =3D cron=0A=
Archive =3D cron.*=0A=
Archive =3D cron.*.gz=0A=
=0A=
Logfile Name: messages=0A=
logfiles =3D messages=0A=
*applystddate =3D =0A=
*removeservice =3D talkd=0A=
*removeservice =3D telnetd=0A=
*removeservice =3D inetd=0A=
*removeservice =3D nfsd=0A=
*removeservice =3D /sbin/mingetty=0A=
archives =3D messages.*=0A=
archives =3D messages.*.gz=0A=
*expandrepeats =3D =0A=
Logfile =3D messages=0A=
Archive =3D messages.*=0A=
Archive =3D messages.*.gz=0A=
=0A=
Logfile Name: xferlog=0A=
logfiles =3D xferlog=0A=
archives =3D xferlog.*=0A=
archives =3D xferlog.*.gz=0A=
Logfile =3D xferlog=0A=
Archive =3D xferlog.*=0A=
Archive =3D xferlog.*.gz=0A=
=0A=
Logfile Name: maillog=0A=
logfiles =3D maillog=0A=
*applystddate =3D =0A=
archives =3D maillog.*=0A=
archives =3D maillog.*.gz=0A=
*expandrepeats =3D =0A=
Logfile =3D maillog=0A=
Archive =3D maillog.*=0A=
Archive =3D maillog.*.gz=0A=
=0A=
Logfile Name: tac_acc=0A=
logfiles =3D tac_acc.log=0A=
*applystddate =3D =0A=
archives =3D tac_acc.log.*=0A=
archives =3D tac_acc.log.*.gz=0A=
Logfile =3D tac_acc.log=0A=
Archive =3D tac_acc.log.*=0A=
Archive =3D tac_acc.log.*.gz=0A=
=0A=
Logfile Name: samba=0A=
logfiles =3D samba-log.*=0A=
logfiles =3D samba/*=0A=
archives =3D /dev/null=0A=
Logfile =3D samba-log.*=0A=
Logfile =3D samba/*=0A=
Archive =3D /dev/null=0A=
=0A=
LogFiles that will be processed:=0A=
[0] =3D messages=0A=
[1] =3D cron=0A=
[2] =3D exim=0A=
[3] =3D xferlog=0A=
[4] =3D maillog=0A=
[5] =3D secure=0A=
[6] =3D rt314=0A=
[7] =3D samba=0A=
[8] =3D tac_acc=0A=
[9] =3D up2date=0A=
[10] =3D none=0A=
=0A=
=0A=
=0A=
Made Temp Dir: /tmp/logwatch.XXHAqtgK with mktemp=0A=
=0A=
Preprocessing LogFile: messages=0A=
/var/log/messages 2>/dev/null | /etc/log.d/scripts/shared/expandrepeats =
''| /etc/log.d/scripts/shared/removeservice 'talkd'| =
/etc/log.d/scripts/shared/applystddate ''>/tmp/logwatch.XXHAqtgK/messages=0A=
DEBUG: Inside RemoveService...=0A=
DEBUG: Inside ApplyStdDate...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: May 22=0A=
DEBUG: Inside RemoveService: 636 Lines In, 636 Lines Out=0A=
=0A=
Preprocessing LogFile: cron=0A=
/var/log/cron 2>/dev/null | /etc/log.d/scripts/shared/removeservice =
'anacron'| =
/etc/log.d/scripts/logfiles/cron/applydate>/tmp/logwatch.XXHAqtgK/cron=0A=
DEBUG: Inside RemoveService...=0A=
DEBUG: Inside ApplyDate (cron)...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: 05/22 or May 22=0A=
DEBUG: Inside RemoveService: 148 Lines In, 143 Lines Out=0A=
DEBUG: ApplyDate (cron): 143 Lines In, 37 Lines Out=0A=
=0A=
Preprocessing LogFile: exim=0A=
/var/log/exim/exim_mainlog 2>/dev/null >/tmp/logwatch.XXHAqtgK/exim=0A=
=0A=
Preprocessing LogFile: xferlog=0A=
/var/log/xferlog 2>/dev/null | =
/etc/log.d/scripts/logfiles/xferlog/applydate| =
/etc/log.d/scripts/logfiles/xferlog/removeheaders>/tmp/logwatch.XXHAqtgK/=
xferlog=0A=
DEBUG: Inside ApplyDate (xferlog)...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: May 22=0A=
=0A=
Preprocessing LogFile: maillog=0A=
/var/log/maillog 2>/dev/null | /etc/log.d/scripts/shared/expandrepeats =
''| /etc/log.d/scripts/shared/applystddate =
''>/tmp/logwatch.XXHAqtgK/maillog=0A=
DEBUG: Inside ApplyStdDate...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: May 22=0A=
=0A=
Preprocessing LogFile: secure=0A=
/var/log/secure 2>/dev/null | /etc/log.d/scripts/shared/applystddate =
''>/tmp/logwatch.XXHAqtgK/secure=0A=
DEBUG: Inside ApplyStdDate...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: May 22=0A=
=0A=
Preprocessing LogFile: rt314=0A=
/var/log/netgear.log 2>/dev/null | =
/etc/log.d/scripts/shared/applystddate ''>/tmp/logwatch.XXHAqtgK/rt314=0A=
DEBUG: Inside ApplyStdDate...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: May 22=0A=
=0A=
Preprocessing LogFile: samba=0A=
/var/log/samba-log.* /var/log/samba/* 2>/dev/null | =
/etc/log.d/scripts/logfiles/samba/applydate| =
/etc/log.d/scripts/logfiles/samba/removeheaders>/tmp/logwatch.XXHAqtgK/sa=
mba=0A=
DEBUG: Inside ApplyDate (samba)...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: 05/22/02 or 2002/05/22=0A=
=0A=
Preprocessing LogFile: tac_acc=0A=
/var/log/tac_acc.log 2>/dev/null | =
/etc/log.d/scripts/shared/applystddate ''>/tmp/logwatch.XXHAqtgK/tac_acc=0A=
DEBUG: Inside ApplyStdDate...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: May 22=0A=
=0A=
Preprocessing LogFile: up2date=0A=
/var/log/up2date 2>/dev/null | =
/etc/log.d/scripts/logfiles/up2date/applydate| =
/etc/log.d/scripts/logfiles/up2date/removeheaders>/tmp/logwatch.XXHAqtgK/=
up2date=0A=
DEBUG: Inside ApplyDate (up2date)...=0A=
DEBUG: Range: yesterday=0A=
DEBUG: Looking For: Wed May 22 2002=0A=
=0A=
Processing Service: automount=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'automount' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/automount) 2>&1 =0A=
=0A=
=0A=
################## LogWatch 3.1 Begin ##################### =0A=
=0A=
DEBUG: Inside OnlyService for automount=0A=
=0A=
Processing Service: cron=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/cron | =
/etc/log.d/scripts/services/cron) 2>&1 =0A=
=0A=
Processing Service: dhcpd=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'dhcpd' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/dhcpd) 2>&1 =0A=
DEBUG: Inside OnlyService for dhcpd=0A=
=0A=
Processing Service: ftpd-messages=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'ftpd' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/ftpd-messages) 2>&1 =0A=
DEBUG: Inside OnlyService for ftpd=0A=
=0A=
=0A=
--------------------- ftpd-messages Begin ------------------------ =0A=
=0A=
**Unmatched Entries**=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
online.tcom.ohiou.edu: kurz[10213]: FTP LOGIN FROM online.tcom.ohiou.edu =
[132.235.75.195], kurz=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
online.tcom.ohiou.edu: kurz[10431]: FTP LOGIN FROM online.tcom.ohiou.edu =
[132.235.75.195], kurz=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-185.cns.ohiou.edu: fhealth[10433]: FTP LOGIN FROM =
dhcp-074-185.cns.ohiou.edu [132.235.74.185], fhealth=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-185.cns.ohiou.edu: fhealth[10468]: FTP LOGIN FROM =
dhcp-074-185.cns.ohiou.edu [132.235.74.185], fhealth=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
66.145.195.13: oet[10496]: FTP LOGIN FROM 66.145.195.13 [66.145.195.13], =
oet=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-185.cns.ohiou.edu: fhealth[10527]: FTP LOGIN FROM =
dhcp-074-185.cns.ohiou.edu [132.235.74.185], fhealth=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[11571]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[11903]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[12169]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[12195]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[12199]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[12216]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-107.cns.ohiou.edu: newsroom[12281]: FTP LOGIN FROM =
dhcp-074-107.cns.ohiou.edu [132.235.74.107], newsroom=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[12289]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
198.234.122.163: newsop[12387]: FTP LOGIN FROM 198.234.122.163 =
[198.234.122.163], newsop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
198.234.122.163: webop[12398]: FTP LOGIN FROM 198.234.122.163 =
[198.234.122.163], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[12422]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[12423]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
dhcp-074-085.cns.ohiou.edu: webop[12426]: FTP LOGIN FROM =
dhcp-074-085.cns.ohiou.edu [132.235.74.85], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
198.234.122.163: webop[12452]: FTP LOGIN FROM 198.234.122.163 =
[198.234.122.163], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
198.234.122.163: webop[12453]: FTP LOGIN FROM 198.234.122.163 =
[198.234.122.163], webop=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
wu-ftpd - TLS settings: control allow, client_cert allow, data allow=0A=
FTP LOGIN FAILED (cannot set guest privileges) for 216.202.164.252 =
[216.202.164.252], ftp=0A=
=0A=
=0A=
---------------------- ftpd-messages End ------------------------- =0A=
=0A=
=0A=
Processing Service: ftpd-xferlog=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/xferlog | =
/etc/log.d/scripts/services/ftpd-xferlog) 2>&1 =0A=
=0A=
Processing Service: identd=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'identd' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/identd) 2>&1 =0A=
DEBUG: Inside OnlyService for identd=0A=
=0A=
Processing Service: in.qpopper=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/maillog | =
/etc/log.d/scripts/shared/onlyservice 'in.qpopper' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/in.qpopper) 2>&1 =0A=
DEBUG: Inside OnlyService for in.qpopper=0A=
=0A=
Processing Service: init=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'init' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/init) 2>&1 =0A=
DEBUG: Inside OnlyService for init=0A=
=0A=
Processing Service: ipop3d=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/maillog /tmp/logwatch.XXHAqtgK/secure =
| /etc/log.d/scripts/shared/onlyservice 'ipop3d' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/ipop3d) 2>&1 =0A=
DEBUG: Inside OnlyService for ipop3d=0A=
=0A=
=0A=
--------------------- ipop3d Begin ------------------------ =0A=
=0A=
---------------------- ipop3d End ------------------------- =0A=
=0A=
Processing Service: kernel=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'kernel' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/kernel) 2>&1 =0A=
DEBUG: Inside OnlyService for kernel=0A=
=0A=
Processing Service: modprobe=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'modprobe' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/modprobe) 2>&1 =0A=
DEBUG: Inside OnlyService for modprobe=0A=
=0A=
Processing Service: mountd=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'mountd' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/mountd) 2>&1 =0A=
DEBUG: Inside OnlyService for mountd=0A=
=0A=
Processing Service: named=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'named' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/named) 2>&1 =0A=
DEBUG: Inside OnlyService for named=0A=
=0A=
=0A=
DEBUG: Inside Named Filter =0A=
=0A=
=0A=
Processing Service: pam=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'pam' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/pam) 2>&1 =0A=
DEBUG: Inside OnlyService for pam=0A=
=0A=
Processing Service: pam_pwdb=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'pam_pwdb' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/pam_pwdb) 2>&1 =0A=
DEBUG: Inside OnlyService for pam_pwdb=0A=
=0A=
Processing Service: pam_unix=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/services/pam_unix) 2>&1 =0A=
=0A=
=0A=
--------------------- pam_unix Begin ------------------------ =0A=
ftp:=0A=
Authentication Failures:=0A=
edtcom (dhcp-074-071.cns.ohiou.edu ): 8 Time(s)=0A=
=0A=
sshd:=0A=
Authentication Failures:=0A=
root (dhcp-074-123.cns.ohiou.edu ): 1 Time(s)=0A=
=0A=
samba:=0A=
Unknown Entries:=0A=
session opened for user root by (uid=3D0): 32 Time(s)=0A=
session closed for user root: 32 Time(s)=0A=
=0A=
=0A=
--------------------- pam_unix End -------------------------- =0A=
=0A=
=0A=
Processing Service: pluto=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/secure | =
/etc/log.d/scripts/services/pluto) 2>&1 =0A=
=0A=
Processing Service: portsentry=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'portsentry' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/portsentry) 2>&1 =0A=
DEBUG: Inside OnlyService for portsentry=0A=
=0A=
Processing Service: proftpd-messages=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'proftpd' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/proftpd-messages) 2>&1 =0A=
DEBUG: Inside OnlyService for proftpd=0A=
=0A=
Processing Service: qmail=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/maillog | =
/etc/log.d/scripts/shared/onlyservice 'qmail' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/qmail) 2>&1 =0A=
DEBUG: Inside OnlyService for qmail=0A=
=0A=
Processing Service: samba=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/samba | =
/etc/log.d/scripts/services/samba) 2>&1 =0A=
=0A=
=0A=
DEBUG: Inside Samba Filter =0A=
=0A=
=0A=
=0A=
--------------------- Samba Begin ------------------------ =0A=
=0A=
**Unmatched Entries**=0A=
nmbd/nmbd_browsesync.c:find_domain_master_name_query_fail(359) =
find_domain_master_name_query_fail: Unable to find the Domain Master =
Browser name WOUB.ORG<1b> for the workgroup WOUB.ORG. Unable to sync =
browse lists in this workgroup. : 760 Time(s)=0A=
smbd/service.c:make_connection(381) root logged in as admin user (root =
privileges) : 32 Time(s)=0A=
=0A=
=0A=
---------------------- Samba End ------------------------- =0A=
=0A=
=0A=
Processing Service: secure=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/secure | =
/etc/log.d/scripts/services/secure) 2>&1 =0A=
=0A=
=0A=
---------------- Connections (secure-log) Begin ------------------- =0A=
=0A=
Connections:=0A=
Service ftp:=0A=
216.202.164.252: 8 Time(s)=0A=
132.235.74.85: 10 Time(s)=0A=
66.145.195.13: 1 Time(s)=0A=
198.234.122.163: 4 Time(s)=0A=
132.235.75.195: 2 Time(s)=0A=
132.235.74.71: 10 Time(s)=0A=
132.235.74.185: 3 Time(s)=0A=
132.235.74.107: 1 Time(s)=0A=
=0A=
=0A=
----------------- Connections (secure-log) End -------------------- =0A=
=0A=
=0A=
Processing Service: sendmail=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/maillog | =
/etc/log.d/scripts/shared/onlyservice 'sendmail' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/sendmail) 2>&1 =0A=
DEBUG: Inside OnlyService for sendmail=0A=
=0A=
=0A=
--------------------- sendmail Begin ------------------------ =0A=
=0A=
2320855 bytes transferred=0A=
72 messages sent=0A=
=0A=
Unknown users:=0A=
20news@woub.org: 1 Times(s)=0A=
=0A=
=0A=
Relaying denied:=0A=
From 24-90-145-95.nyc.rr.com [24.90.145.95] to ibookpc@aol.com: 1 =
Times(s)=0A=
From 24-90-145-95.nyc.rr.com [24.90.145.95] to tamamade@usa.net: 1 =
Times(s)=0A=
=0A=
=0A=
Did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA:=0A=
212.45.15.233: 1 Times(s)=0A=
156.63.133.6: 7 Times(s)=0A=
24.90.145.95: 1 Times(s)=0A=
=0A=
---------------------- sendmail End ------------------------- =0A=
=0A=
Processing Service: sshd=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/secure | =
/etc/log.d/scripts/shared/onlyservice 'sshd' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/sshd) 2>&1 =0A=
DEBUG: Inside OnlyService for sshd=0A=
=0A=
=0A=
DEBUG: Inside SSHD Filter =0A=
=0A=
DEBUG(1): Accepted password for root from 132.235.74.123 port 3661=0A=
DEBUG: Found -root logged in from 132.235.74.123 using password=0A=
DEBUG(2): Could not reverse map address 198.234.122.163.=0A=
DEBUG(3): Accepted password for root from 198.234.122.163 port 1028=0A=
DEBUG: Found -root logged in from 198.234.122.163 using password=0A=
DEBUG(4): Accepted password for root from 132.235.74.123 port 4594=0A=
DEBUG: Found -root logged in from 132.235.74.123 using password=0A=
DEBUG(5): Accepted password for root from 132.235.74.85 port 1711=0A=
DEBUG: Found -root logged in from 132.235.74.85 using password=0A=
DEBUG(6): Accepted password for root from 132.235.74.85 port 1712=0A=
DEBUG: Found -root logged in from 132.235.74.85 using password=0A=
DEBUG(7): Failed password for root from 132.235.74.123 port 1049=0A=
DEBUG: Found -Failed login- line=0A=
DEBUG(8): Accepted password for root from 132.235.74.123 port 1049=0A=
DEBUG: Found -root logged in from 132.235.74.123 using password=0A=
DEBUG(9): Accepted password for root from 132.235.74.123 port 1225=0A=
DEBUG: Found -root logged in from 132.235.74.123 using password=0A=
=0A=
=0A=
--------------------- SSHD Begin ------------------------ =0A=
=0A=
Failed logins from these:=0A=
root/password from 132.235.74.123: 1 Time(s)=0A=
=0A=
Users logging in through sshd:=0A=
root logged in from dhcp-074-085.cns.ohiou.edu (132.235.74.85) =
using password: 2 Time(s)=0A=
root logged in from dhcp-074-123.cns.ohiou.edu (132.235.74.123) =
using password: 4 Time(s)=0A=
root logged in from 198.234.122.163 using password: 1 Time(s)=0A=
=0A=
=0A=
---------------------- SSHD End ------------------------- =0A=
=0A=
=0A=
Processing Service: sshd2=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'sshd2' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/sshd2) 2>&1 =0A=
DEBUG: Inside OnlyService for sshd2=0A=
=0A=
Processing Service: sudo=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/secure | =
/etc/log.d/scripts/shared/onlyservice 'sudo' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/sudo) 2>&1 =0A=
DEBUG: Inside OnlyService for sudo=0A=
=0A=
Processing Service: syslogd=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/messages | =
/etc/log.d/scripts/shared/onlyservice 'syslogd' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/syslogd) 2>&1 =0A=
DEBUG: Inside OnlyService for syslogd=0A=
=0A=
Processing Service: up2date=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/up2date | =
/etc/log.d/scripts/services/up2date) 2>&1 =0A=
=0A=
=0A=
DEBUG: Inside up2date Filter =0A=
=0A=
DEBUG(1): new up2date run started=0A=
DEBUG(2): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(3): updating login info=0A=
DEBUG(4): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(5): logging into up2date server=0A=
DEBUG(6): successfully retrieved authentication token from up2date server=0A=
DEBUG(7): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(8): getAvailablePackageList from network=0A=
DEBUG(9): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(10): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(11): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(12): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(13): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(14): installing packages: ['cvs-1.11.1p1-7'] =0A=
DEBUG(15): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(16): Opening rpmdb in /var/lib/rpm/ with option 1=0A=
DEBUG(17): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(18): Adding packages to package profile: ['cvs-1.11.1p1-7']=0A=
DEBUG(19): deleting /var/spool/up2date/cvs-1.11.1p1-7.i386.hdr=0A=
DEBUG(20): deleting /var/spool/up2date/cvs-1.11.1p1-7.i386.rpm=0A=
DEBUG(21): new up2date run started=0A=
DEBUG(22): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(23): updating login info=0A=
DEBUG(24): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(25): logging into up2date server=0A=
DEBUG(26): successfully retrieved authentication token from up2date =
server=0A=
DEBUG(27): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
DEBUG(28): getAvailablePackageList from network=0A=
DEBUG(29): Opening rpmdb in /var/lib/rpm/ with option 0=0A=
=0A=
=0A=
--------------------- up2date Begin ------------------------ =0A=
=0A=
Package Installed:=0A=
1['cvs-1.11.1p1-7']=0A=
=0A=
Package Added To Profile:=0A=
1['cvs-1.11.1p1-7']=0A=
=0A=
**Unmatched Entries**=0A=
new up2date run started=0A=
deleting /var/spool/up2date/cvs-1.11.1p1-7.i386.hdr=0A=
deleting /var/spool/up2date/cvs-1.11.1p1-7.i386.rpm=0A=
new up2date run started=0A=
=0A=
=0A=
---------------------- up2date End ------------------------- =0A=
=0A=
=0A=
Processing Service: vpopmail=0A=
( /bin/cat /tmp/logwatch.XXHAqtgK/maillog | =
/etc/log.d/scripts/shared/onlyservice 'vpopmail' =
|/etc/log.d/scripts/shared/removeheaders '' =
|/etc/log.d/scripts/services/vpopmail) 2>&1 =0A=
DEBUG: Inside OnlyService for vpopmail=0A=
=0A=
Processing Service: zz-fortune=0A=
/etc/log.d/scripts/services/zz-fortune 2>&1 =0A=
=0A=
=0A=
###################### LogWatch End ######################### =0A=
------=_NextPart_000_004B_01C2063B.38219FC0--